The best laundry room vent fan depends on room size, duct dimensions, and installation opening. The V2262-50 is specifically listed for laundry rooms and is suited to smaller spaces with an 8-inch rough-in. For more airflow, the JOEAONZ and Orsong models offer 110 CFM, while the Amico provides 80 CFM and the Broan-NuTone offers compact 50 CFM ventilation. Check the product’s duct and ceiling requirements against your existing setup before choosing.
| Fan | Listed airflow | Best suited for |
|---|---|---|
| V2262-50 | 50 CFM | Small laundry rooms with an 8-inch rough-in |
| JOEAONZ | 110 CFM | Rooms needing higher airflow and a 4-inch duct |
| Amico | 80 CFM | Installations using a 4-inch duct |
| Broan-NuTone | 50 CFM | Compact spaces and shallow installation needs |
| Orsong | 110 CFM | Rooms up to 100 square feet, as listed |
V2262-50 7-Inch Exhaust Fan
Best for: Smaller laundry rooms where the existing ceiling opening and duct arrangement match the fan’s requirements. This model is explicitly described for laundry room use and provides 50 CFM.
Its listed features include a 1.0-sone rating and a motor duct measuring 6.5 inches long. The manufacturer describes the fan as designed to help remove odors, moisture, and grease. It is also listed for bathrooms, mobile homes, kitchens, and garages.
Limitation: The fan requires an 8-inch-diameter rough-in opening and compatible P7.19 hard duct or VC0292 flex duct. Confirm there is adequate ceiling space before selecting it.
JOEAONZ 110 CFM Quiet Exhaust Fan
Best for: Buyers who want higher listed airflow and have a compatible 4-inch duct. The fan is rated at 110 CFM and 1.0 sone, and its product details specify use in enclosed rooms up to 107 square feet.
The fan has a metal housing and a detachable 4-inch polymeric duct connector. The listing says it may connect to an existing exhaust pipe when the size matches, which can make it a candidate for a replacement project.
Limitation: Its 4-inch duct requirement may not match an existing laundry room vent. Measure the duct and check the installation instructions rather than assuming the connector will fit.
Amico 80 CFM Exhaust Fan
Best for: Buyers looking for a middle airflow option with a stated 4-inch duct connection. At 80 CFM, it sits between the 50 CFM models and the 110 CFM options in this list.
Amico lists a housing size of 7.5 by 7.2 by 4 inches and a grille measuring 9.4 by 8.6 inches. Mounting brackets allow installation between ceiling joists, or the fan can be screwed directly to a joist. The listing also provides a recommended ceiling cutout size of 7.6 by 7.3 inches.
Limitation: The supplied duct diameter is 4 inches. If the existing duct is 3 inches, the listing says to contact Amico about a reducer; do not assume one is included.
Broan-NuTone 50 CFM Fan
Best for: A compact installation in a smaller room where 50 CFM is appropriate and a 3-inch duct is suitable. The product is listed for spaces up to 45 square feet and has an Energy Star certification and a 2.0-sone rating.
Its compact housing measures 7.25 by 7.5 by 3.625 inches, and the cover measures 8.625 by 8.375 inches. Foldable mounting brackets are designed for installation without attic access, according to the product description.
Limitation: Its listed airflow is lower than the 80 and 110 CFM alternatives, and the product is described for smaller bathrooms or powder rooms. Consider room size and ventilation needs before using it in a laundry room.
Orsong 10-Inch Panel Exhaust Fan
Best for: Buyers prioritizing higher listed airflow for a room within the product’s stated coverage. Orsong lists 110 CFM, a 1.0-sone operating level, and suitability for rooms up to 100 square feet.
The product description presents the fan as a way to move humid or stale air and reduce odors. Its 10-inch panel designation can help buyers compare the visible panel size with the intended installation area.
Limitation: The supplied details do not specify duct diameter or cutout dimensions. Confirm those requirements with the complete product information before planning installation.
Buying Guide: How To Choose A Laundry Room Vent Fan
How much airflow does the room need?
Compare room size and intended ventilation needs with the product’s stated CFM and room coverage. In this selection, listed airflow ranges from 50 to 110 CFM. Higher CFM is not the only factor: the fan must also fit the duct route and installation opening. The listed room coverage is product information, not a substitute for checking local requirements or getting professional advice when needed.
Will the duct and ceiling opening fit?
Measure the existing duct diameter, ceiling cutout, and available depth before buying. The models here have different requirements: the JOEAONZ and Amico list 4-inch ducts, Broan-NuTone lists a 3-inch duct, and the V2262-50 calls for an 8-inch rough-in opening. Orsong’s supplied details do not state its duct size, so verify it before purchase.
What should you consider about noise and installation?
Among the products with stated sound ratings, the JOEAONZ and Orsong list 1.0 sone, while Broan-NuTone lists 2.0 sones. Installation features also vary: Broan-NuTone lists foldable brackets and no-attic-access installation, while Amico lists brackets for joist mounting. Review the installation instructions and make sure the fan can be vented as intended.
Frequently Asked Questions
Can a bathroom exhaust fan be used in a laundry room?
Several products in this list are described as bathroom exhaust fans, but some state broader room uses. Check the product’s intended applications, airflow, duct size, and installation requirements before using one in a laundry room.
Which listed fan is specifically described for laundry rooms?
The V2262-50 listing names laundry rooms among its intended applications. It provides 50 CFM and requires an 8-inch rough-in opening.
Is a 110 CFM fan always the best choice?
No. A fan’s CFM should suit the room and installation, and its duct and opening must match the space. Compare the listed airflow and room coverage with the product’s physical requirements.
Why measure the duct before buying?
Duct diameter varies among these products. Measuring first helps identify whether the fan’s connector can work with the existing duct or whether a different setup is needed.