For a well requiring water delivery near 400 feet, compare a pump’s maximum head with the total vertical lift and system pressure your installation needs. The Hallmark Industries 2 HP pump rated for 420 feet is a close match; the VEVOR 3 HP model offers greater listed maximum head, while other Hallmark options and the GENTERUN model are rated for 400 feet. These figures are product specifications, not a guarantee of a particular flow rate at your well’s depth.
| Product | Best For | Listed Maximum Head |
|---|---|---|
| Hallmark MA0419X-12A | A 400-foot-class pump with some listed head above 400 feet | 420 feet |
| VEVOR 3 HP | Buyers comparing higher maximum head | 640 feet |
| Hallmark 2 HP | A 400-foot specification and stainless-steel construction | 400 feet |
| Hallmark MA0419X-12AEXT | Buyers looking for a model listed with a control box | Not stated in supplied features |
| GENTERUN MA0419X-12A | A 400-foot-class pump with a stated 3.8-inch diameter | 400 feet |
Hallmark Industries MA0419X-12A 2 HP Pump
This 230-volt, 2 HP submersible pump is listed with a maximum head of 420 feet and a flow rate of up to 35 gallons per minute. Its stainless-steel construction is a stated feature. Among these options, it is a close match for buyers searching for a 400-foot well pump who want a listed head rating slightly above 400 feet.
Best for: A deep-well installation where the required pump head is within the unit’s specifications and the buyer wants a 2 HP model. Confirm the required flow at the actual operating head before choosing it. The supplied product information does not give a performance curve, so maximum flow should not be assumed at maximum head.
VEVOR 3 HP Deep Well Pump
VEVOR lists this 230-volt, 3 HP pump with a 640-foot maximum head and maximum flow of 37 GPM. It has an 18-stage impeller design, a 4-inch diameter, a 1-1/4-inch NPT discharge, and a 33-foot electric cord. The product information also states IP68 waterproof grade and describes a copper motor with built-in overheat protection.
Best for: Buyers comparing pumps with a maximum head above 400 feet, or installations that need the listed 4-inch-or-larger casing fit. Its stated maximum flow is not necessarily available at maximum head. The listing warns against operating the pump without water or at a low water level, so confirm operating conditions before installation.
Hallmark Industries 2 HP 400-Foot Pump
This Hallmark Industries submersible pump is rated at 2 HP and 230 volts, with a listed maximum head of 400 feet and maximum flow of 35 GPM. The product name describes it as all stainless steel. It is a direct specification match for shoppers comparing pumps advertised for a 400-foot head.
Best for: Buyers whose calculated system requirements fit the 400-foot rating and who want the stated 2 HP and 35 GPM maximum-flow specifications. Because the rating is exactly 400 feet, verify that total dynamic head—including water lift and pressure needs—does not exceed the pump’s capacity. The supplied details do not include a flow curve.
Hallmark MA0419X-12AEXT With Control Box
This 4-inch deep-well submersible pump is listed as a 2 HP, 230 VAC model with a control box. The supplied product features also state a 35 GPM maximum. The product name identifies stainless-steel construction and a 3.8-inch dimension, but the provided feature details do not state a maximum head rating.
Best for: Buyers who specifically want a Hallmark 2 HP pump listing that includes a control box. It was selected as a related deep-well option, but the supplied information does not confirm that its head rating reaches 400 feet. Avoid choosing it for a 400-foot application until the manufacturer’s specifications confirm the required head and flow.
GENTERUN MA0419X-12A 400-Foot Pump
GENTERUN lists this 2 HP, 230-volt pump with a 400-foot maximum head and flow up to 35 GPM. Its stated diameter is 3.8 inches, and the listing describes it as suitable for 4-inch-or-larger well casings. The features also specify stainless steel for the shell, motor shaft, and exterior components, plus a 14-stage impeller design.
Best for: Buyers comparing a 400-foot pump with a stated 3.8-inch body and stainless-steel components. Check casing clearance and the required flow at your operating head before buying. The listed 35 GPM is a maximum, not a stated flow rate at 400 feet.
Buying Guide: How to Choose a 400-Foot Well Pump
Does a 400-foot rating mean the pump works at a 400-foot well depth?
Not necessarily. Maximum head is a pump specification, while the required head depends on the installation. Account for the vertical distance from the pumping water level, pressure needed at the outlet, and losses through piping and fittings. A pump operating at its maximum head may deliver less water than its listed maximum flow.
How much flow do you need?
Compare your household, irrigation, or other water demand with the pump’s performance at the required head. The listed 35 or 37 GPM figures are maximum-flow claims; the supplied product information does not provide performance curves showing flow at 400 feet. Ask the manufacturer for a curve or technical details when flow at depth is critical.
What electrical and fit details should you check?
Confirm that the pump’s voltage matches the available electrical supply and verify the well casing diameter, discharge connection, and installation requirements. The listed models include 230-volt options, and the VEVOR listing specifies a 1-1/4-inch NPT discharge. Have a qualified well or electrical professional confirm wiring and installation requirements for your system.
Should you choose a pump rated above 400 feet?
A higher maximum-head rating may provide more specification margin, but it does not automatically make a pump the right choice. Compare the required operating head, flow, motor specifications, and installation fit. The VEVOR model lists 640 feet, while several other options list 400 or 420 feet.
Frequently Asked Questions
What is the closest listed match for a 400-foot well pump?
The Hallmark Industries MA0419X-12A is listed at 420 feet of maximum head, while the Hallmark 2 HP and GENTERUN models are listed at 400 feet.
Which listed pump has the highest maximum head?
The VEVOR 3 HP pump has the highest stated maximum head among these selections: 640 feet.
Can a pump deliver its maximum GPM at maximum head?
Do not assume so. Maximum flow and maximum head are separate specifications; check a manufacturer performance curve for flow at the operating head.
What does the VEVOR listing say about running the pump dry?
It warns not to use the pump without water or at a low water level because idle running can cause problems.
Is the Hallmark MA0419X-12AEXT confirmed for a 400-foot installation?
The supplied features do not state its maximum head. Confirm the head specification with the manufacturer before selecting it for a 400-foot application.