No product in this list is clearly specified as a sump pump rated for 200 gallons per minute. The Goulds is a sump pump but lists a 70 GPM maximum; the VEVOR is an air-operated transfer pump with a listed maximum of 158.4 GPM; and the Paramount product is a drain cover, not a pump. The options below may help with related pumping or drainage needs, but confirm the pump curve and installation requirements before buying for a 200 GPM application.
| Product | Best suited for | Listed flow information |
|---|---|---|
| Hallmark Industries MA0387X-9A | Sewage or effluent pumping research | Product name states 7,250 GPM; verify this unusual figure |
| VEVOR Air-Operated Diaphragm Pump | Air-powered fluid transfer | 158.4 GPM maximum |
| Goulds WEHT0311M | High-temperature sump applications | 70 GPM maximum |
| Paramount SDX Drain Cover | Pool drain installations | Up to 200 GPM listed for the drain cover |
| Zoeller J841 Grinder Pump | Grinder-pump applications | 61 GPM maximum |
Hallmark Industries MA0387X-9A Sewage Pump
This heavy-duty sewage effluent pump is described as a 1-horsepower, 230-volt model with stainless-steel construction and a cast-iron impeller. Its product name states 7,250 GPM, a figure that is unusually high and is not enough on its own to confirm real-world capacity or suitability for a 200 GPM sump system.
Best for: Buyers investigating a sewage or effluent pump who can verify the manufacturer’s pump curve and electrical requirements. It was selected because it is a submersible-style sewage pump, a closer application match than general transfer or circulation pumps. Caution: Confirm the listed flow figure, head, and float-switch details before purchase; the supplied features do not establish 200 GPM performance.
VEVOR Air-Operated Double Diaphragm Pump
VEVOR lists a maximum flow rate of 158.4 GPM, a maximum pressure of 120 PSI, and a maximum head lift of 275.6 feet. The pump has a 2-inch inlet and outlet, an aluminum-alloy body, and nitrile diaphragms. It is air-operated and is described for petroleum, diesel, oil, and other low-viscosity fluids.
Best for: Buyers who need an air-powered transfer pump for compatible fluids and whose required flow is within the stated maximum. It is included because its listed flow is the closest among the supplied transfer-pump options to 200 GPM. Caution: Its stated maximum is below 200 GPM, and it is not identified as a sump pump. Actual delivery depends on operating conditions.
Goulds WEHT0311M High-Temperature Sump Pump
This 1/3-horsepower, 115-volt sump pump has a listed maximum flow of 70 GPM and a 2-inch NPT discharge. Its features include a cast-iron volute, a semi-open non-clog impeller, a corrosion-resistant stainless-steel shaft, and a capacitor-start motor. The product is described as a high-temperature model.
Best for: Buyers seeking a sump pump for an application where its stated temperature and flow specifications fit. It was selected because it is the clearest conventional sump-pump match in the product list. Caution: Its 70 GPM maximum is well below 200 GPM, so it should not be treated as a single-pump solution for that target.
Paramount SDX High-Flow Safety Drain Cover
This product is a drain cover, not a pump. Its listed information says it supports a maximum of 200 GPM at the opening and does not require a sump to meet the stated pipe-diameter sump-depth requirement. The feature description also lists an opening velocity of 1.485 feet per second at maximum flow.
Best for: Buyers planning a compatible pool-drain installation and looking for a component with a stated 200 GPM flow figure. It is included because that number directly matches the search target, but it does not move water by itself. Caution: Do not use its drain rating as evidence that a pump delivers 200 GPM.
Zoeller J841 Shark Series Grinder Pump
This 2-horsepower, three-phase grinder pump lists a maximum flow of 61 GPM and a maximum head of 125 feet. Its features include Class 30 cast-iron construction, a powder-coated epoxy finish, and a 1¼-inch NPT discharge.
Best for: Buyers comparing grinder-pump equipment for applications that suit its listed electrical and discharge specifications. It was selected as a related wastewater pump, not as a 200 GPM sump solution. Caution: Its 61 GPM maximum is substantially below the requested flow, and the three-phase electrical requirement needs careful verification.
Buying Guide: How To Choose A 200 GPM Sump Pump
Does the pump actually deliver 200 GPM?
Check the manufacturer’s pump curve rather than relying on a maximum-flow figure alone. Flow changes with total dynamic head, which includes vertical lift and resistance from pipe, fittings, and valves. A pump advertised near 200 GPM may deliver less at the head required by your installation.
Is it a sump pump or a related component?
Confirm the product category and intended fluid. A drain cover does not pump water, while a transfer pump or sewage grinder may not suit ordinary sump-water service. Check solids handling, temperature limits, and whether the pump is intended for continuous or intermittent operation.
What electrical and plumbing details matter?
Match voltage, phase, discharge size, and available circuit capacity to the installation. Compare the pump’s discharge connection with the pipe system, and consider whether a float switch or separate control is included. Do not assume a switch or a particular installation configuration unless the product specifications confirm it.
When might more than one pump be needed?
If a single compatible pump cannot meet the required flow at the actual system head, ask a qualified pump professional about properly engineered alternatives. Multiple pumps require suitable controls, discharge plumbing, and electrical capacity; simply adding nominal flow ratings does not guarantee a 200 GPM system.
Frequently Asked Questions
Is any listed product confirmed to be a 200 GPM sump pump?
No. The Goulds sump pump lists 70 GPM maximum. The VEVOR transfer pump lists 158.4 GPM maximum, and the Paramount product is a drain cover rather than a pump.
Does a 200 GPM drain cover provide 200 GPM of pumping?
No. The Paramount SDX is a drain-cover component with a listed flow figure; it does not generate flow. Pump capacity must be checked separately.
Why can actual pump flow be lower than the maximum?
Maximum flow generally does not describe delivery at every installation condition. Lift height and system resistance affect the flow a pump can provide, so consult its performance curve.
What should I verify before buying for a sump?
Confirm the pump curve at required head, intended fluid, solids-handling capability, electrical supply, discharge size, and control method. Verify that the product is designed for the specific sump application.