The best 1-inch discharge hose depends on the distance you need to cover, your pump connection, and whether you prefer a flat hose or preinstalled fittings. PEISONGFEI and DAVCO offer 100-foot options for longer runs, while Eastrans provides a 50-foot hose with camlock fittings. For shorter jobs, the 25-foot DAVCO hose is easier to size to a nearby drain. The 6699 hose is another 100-foot choice and lists a maximum burst pressure, but that figure is not the same as working pressure.
| Product | Best For | Length | Notable Detail |
|---|---|---|---|
| PEISONGFEI | Pool owners needing a long hose and clamps | 100 ft | 90 PSI working pressure |
| DAVCO | Long runs with pin-lug fittings | 100 ft | Aluminum male and female connectors |
| Eastrans | Medium-length runs with camlock fittings | 50 ft | Aluminum Camlock C and E fittings |
| DAVCO | Shorter runs with pin-lug fittings | 25 ft | 90 PSI working pressure |
| 6699 | General water removal over long distances | 100 ft | Includes two SUS 304 clamps |
PEISONGFEI 1-Inch By 100-Foot Hose
This PEISONGFEI hose is best for pool owners who need a long, 100-foot discharge line and want clamps included. Its 1-inch inside diameter is listed for standard pool pumps and filters with a 1-inch or smaller connection. The hose has a stated working pressure of 90 PSI and a temperature range of 23°F to 149°F.
It is selected for its pool-focused sizing, long reach, and included four hose clamps. Check your pump outlet size before ordering, and confirm the discharge route has adequate drainage. The supplied details do not specify connector fittings, so verify how the hose attaches to your equipment.
DAVCO 1-Inch By 100-Foot Pin-Lug Hose
Choose this DAVCO model if you need 100 feet of hose and want aluminum pin-lug connectors already attached. It has a 1-inch inside diameter, male and female connectors, and polyester-yarn reinforcement. The listed working pressure is 90 PSI, and the product is described for pool draining, filter backwashing, and other pump discharge uses.
Its fittings make it a better fit for buyers whose pump or valve connection matches the included connector type and size. Check the connection details before purchase; a 1-inch hose diameter alone does not guarantee that fittings will match every pump.
Eastrans 1-Inch By 50-Foot Camlock Hose
This Eastrans hose is best for a medium-length discharge run where 100 feet would be unnecessary. It measures 1 inch in diameter and 50 feet long, with aluminum Camlock C and E fittings. Its reinforced flexible PVC construction is listed for a 90 PSI working pressure and temperatures from 23°F to 149°F.
The camlock fittings distinguish it from the pin-lug options, so choose it when that connection style suits your setup. The listing describes use with in-ground and above-ground pool equipment and resistance to oils, grease, acids, and many chemicals. Confirm fitting compatibility before connecting it to a pump.
DAVCO 1-Inch By 25-Foot Pin-Lug Hose
For a nearby discharge point, this 25-foot DAVCO hose is a shorter alternative to the brand’s 100-foot model. It has a 1-inch inside diameter, aluminum male and female pin-lug fittings, polyester-yarn reinforcement, and a stated 90 PSI working pressure. The shorter length can suit pool draining or filter backwashing when a long run is not needed.
Choose this option if you want the listed connector style and a more compact hose length. Avoid it if your outlet is farther than 25 feet away or your setup requires another fitting type; check the connection size before buying.
6699 1-Inch By 100-Foot Discharge Hose
This 6699 hose is best for buyers seeking a long line for general water removal. It is a 1-inch-diameter, 100-foot PVC hose reinforced with polyester yarn and includes two SUS 304 clamps. The product lists a temperature range of 23°F to 149°F and a maximum burst pressure of 300 PSI.
It is selected for its length and included clamps, with listed uses that include pools, basements, yards, and other water-removal tasks. The stated 300 PSI is maximum burst pressure, not a stated working-pressure rating, so do not treat it as an operating-pressure specification.
Buying Guide: How To Choose A 1-Inch Discharge Hose
How much hose length do you need?
Measure the route from the pump outlet to the discharge point, including turns and the distance needed to position the hose securely. A 25-foot hose suits shorter runs; 50 feet offers a middle option; and 100 feet is useful when the outlet is farther away. Extra length can be cumbersome, so choose based on the actual route rather than length alone.
Which fittings match your pump?
Check the pump outlet and the hose’s included connectors before ordering. The DAVCO models list aluminum male and female pin-lug fittings, while Eastrans lists aluminum Camlock C and E fittings. PEISONGFEI and 6699 include clamps, but the supplied product details do not identify preinstalled fittings. Diameter and connector style are separate compatibility checks.
What pressure rating should you compare?
Compare working pressure with the requirements for your pump and setup. PEISONGFEI, both DAVCO hoses, and Eastrans list a 90 PSI working pressure. The 6699 listing gives a 300 PSI maximum burst pressure, which should not be substituted for a working-pressure rating. Follow the pump and hose instructions for safe use.
Frequently Asked Questions
What is a 1-inch discharge hose used for?
It carries water away from compatible pumps, including during pool draining or filter backwashing. Confirm that the pump outlet and hose fittings match.
Does a 1-inch hose fit every 1-inch pump outlet?
No. The hose diameter does not ensure that its connectors match the pump. Check both the outlet size and fitting type.
Is a lay-flat hose suitable for pool draining?
The listed hoses are described for pool draining or backwashing. Follow the product and pump instructions, and route discharged water to an appropriate location.
Should I choose 25, 50, or 100 feet?
Select a length that reaches the discharge point without unnecessary excess. The DAVCO hose comes in 25- and 100-foot options, while Eastrans lists a 50-foot model.